Foundry Casting Bridge Crane YZ Type
Lifting Capacity: 75t～320t
Span: 10m～40m
Lifting Height: 15m-30m
Work Level: A7～A8
Lifting Capacity: 75t～320t
Span: 10m～40m
Lifting Height: 15m-30m
Work Level: A7～A8
Type:QD
LiftingCapacity:5~800ton
LiftingHeight:12-22meter
Span:10.5~31.5meter
WorkingDuty:A5-A6
AmbientTemperature:-20~40℃
The main structure includes main beams, trolley traveling mechanism, electric trolley, hoisting mechanism, etc. Two double beams are the main supporting structure. With high quality steel, they have a strong frame that can withstand high pressure and bending when lifting heavy loads.
Lifting Capacity: 1~800ton
Lifting Height: 12-22meter
Span: 10.5~31.5meter
Working Duty: A3-A8
Ambient Temperature: -20~40℃
Downshop conductor is a device that supplies power for bridge crane traveling. Bending bracket for installation can effectively avoid interference problems.
Downshop conductor is a device that supplies power for bridge crane traveling. It is composed of sheath, conductor, collector and some auxiliary components.
In order to facilitate the installation, the downshop conductor is usually installed on the track supporting beam. Take the unipolar combination downshop conductor installation as an example, there are 4 conductor bars, and the arrangement is easy to interfere with the crane walker attachment or main girder, as shown in the following figure:
In order to avoid the interference between the conductor and the crane, it is suggested to use the following 3 ways for installation:
1. Bending bracket for installation can effectively avoid interference problems. Bending height H can be determined according to the actual installation, it is recommended not less than 200mm.
2. The bracket is installed below the track bearing beam, and the sinking height H can be determined according to the actual installation, it is recommended not less than 200mm.
3. Adopt side installation.
No matter what kind of downshop conductor, it must be combined with the size of the plant and crane installation.